23-SPS Series Inverter – 110W/250VA – Emergency Power System

The 23-SPS Series is designed to provide up to 220W/250VA of emergency power to incandescent fixtures. The SPS unit provides clean, sinusoidal AC power allowing it to be
remotely up to 1000 feet away from the controlled fixture(s).

Unlike a ballast fluorescent emergency pack, the SPS provides power to the input side of the fixture, (including the ballast) eliminating any chance of incompatibility. The 23-SPS
Series is designed primarily for surface mounting, however, the 23-SPS-55/125 and 23-SPS-110/125 models provide optional housings for recessed or ceiling T-Grid mounting
if required. All 23-SPS systems will provide emergency power output for a minimum of 90 minutes.

FEATURES

• For powering Incandescent, Fluorescent, Induction and LED fixtures
• Sinusoidal output eliminates compatibility problems
• Universal 120/277 VAC, 60Hz. input/output
• “Soft Start” design reduces fixtures inrush current
• Unit may be installed up to 1,000 feet from controlled fixture (s)
• Surface, recessed or T-Grid mount models
• Lumen output from fixture is 100% of nominal
• Unique design eliminates compatibility problems with LED drivers as well as fluorescent and induction ballasts
• Compatible with dimming ballasts
• Normally-on and/or Normally-off load output
• Provisions for local switching capability – Always on during emergency conditions regardless of local switch position
• Emergency fixtures can be on, off or switched
• Solid state, line latched low voltage disconnect provides protection against battery deep discharge
• Long life, maintenance-free lead-calcium battery
• Momentary test switch
• AC-On, Charge-On and Inverter-On LED indicators